Siphon-type Air Spray Nozzle Based on a New Principle (Patent Registered in Japan)

Average particle diameter: 7 μm(experimental value at air pressure of 300 kPa and suction height of 500 mm)
No orifice wear after 1000 hours of continuous spraying(reference: Air pressure 300 kPa, purified water spraying experiment value)

Precision injection molding nozzle

Siphon (self-feeding) spray with compressed air

*This reference material is subject to change without notice to improve performance

Miracle Fog Mini Model No. MF008C

･ Material: Polypropylene
･ Weight: 1 gram
･ Minimum passage size for foreign matter
Air: Rectangular (0.35 x 0.15 mm)
Liquid: φ0.4 mm

Spray performance (spray solution: purified water)

Recommended air pressure range: 30 to 300 kPa
(Note 1) “Suction height” refers to the vertical distance between the water surface and the nozzle, where the liquid surface is located below the nozzle.
The siphon force (suction force) decreases and the spray volume also decreases as the suction height is larger.