Rebound Fog Unit

Domestic Patent Acquired and PCT International Application in Progress

Rebound Fog employs a principle to spray the atomization from a siphon-type air spray nozzle against the liquid surface in the bottle and facilitate the refinement of the atomization in a secondary manner.
Depending on the operating conditions, it is also possible to spray fine particles from the tip of a tube with a length of several meters attached to the unit.

Unit Model No. MF8R3

Unit specifications

・ Material: Polypropylene
Unit size (excluding tube)
Maximum diameter: φ38 mm, total height: 80 mm
Spray port diameter: φ7 mm
・ Liquid storage capacity of bottle: 20 ml as reference value
・ Unit weight: 140 g (excluding tube)
・ Minimum passage size for foreign matter inside the nozzle
Air: Rectangular (0.35 x 0.15 mm)
Liquid: φ0.4 mm

Spraying performance (siphon spray with compressed air)


*Environmental conditions: Room temperature: 25°C / Humidity: 65%
Particle size distribution
Average Particle Size: SMD 1.5 μm
(Purified water, Air pressure 30 kPa)

Average Particle Size: SMD 0.9 μm
(Silicone oil: 100 cSt / Air pressure: 30 kPa)

Unit Model No. MF8R2

Unit specifications

・ Material: Polypropylene
Unit size (excluding tube)
Maximum diameter: φ38 mm, total height: 80 mm
Spray port diameter: φ7 mm
・ Liquid storage capacity of bottle: 20 ml as reference value
・ Unit weight: 140 g (excluding tube)
・ Minimum passage size for foreign matter inside the nozzle
Air: Rectangular (0.35 x 0.15 mm)
Liquid: φ0.4 mm

Spray performance (with no tube)


Environmental conditions: Room temperature: 27°C / Humidity: 59%
TOP